XicsrtOpticPlanarMosaicCrystal
New Members
- class XicsrtOpticPlanarMosaicCrystal(config=None, strict=None, initialize=None)[source]
Bases:
InteractMosaicCrystal
,ShapePlane
A planar mosaic crystal optic.
Configuration Options:
- mosaic_spreadfloat (0.0) [radians]
The fwhm of the Gaussian distribution of crystalite normals around the nominal surface normal.
- mosaic_depthint (15)
The number of crystalite layers to model. This value will depend on the crystal structure and the incident x-ray energy.
- mosaic_cutofffloat (None)
A numerical probability cutoff used to avoid calculation of the mosaic reflection for angles far away from the nominal Bragg angle. A value of 1e-8 would provide a 6-sigma cutoff in angles, while a value of 1e-14 would provide an 8-sigma cutoff. By default no cutoff is used.
- crystal_spacingfloat [angstroms]
The spacing between crystal planes. .. Note:
This is the nominal 'd' crystal spacing, not the '2d' spacing often used in the literature.
- reflectivityfloat (1.0)
A reflectivity factor for this optic. The reflectivity will modify the probability that a ray will reflect from this optic.
- check_braggbool (True)
Switch between x-ray Bragg reflections and optical reflections for this optic. If True, a rocking curve will be used to determine the probability of reflection for rays based on their incident angle. If false this optic will act as a perfect mirror.
- rocking_typestr (‘gaussian’)
The type of shape to use for the crystal rocking curve. Allowed types are ‘step’, ‘gaussian’ and ‘file’.
- rocking_fwhmfloat [rad]
The width of the rocking curve, in radians. This option only used when rocking_type is ‘step’ or ‘gaussian’.
- rocking_filestr or list
A filename from which to read rocking curve data. A list may be used if sigma and pi data are in separate files.
- rocking_filetypestr
The type of rocking curve file to be loaded. The following formats are currently supported: ‘xop’, ‘x0h’, ‘simple’. .. Note:
Actually at this point only 'xop' is supported. np 2020-10-13
- rocking_mixfloat
A mixing factor to combine the sigma and pi reflectivities. This value will be interpreted as sigma/pi and will mix the reflection probabilities linearly. ref = sigma*mix + pi*(1-mix)
- xsize
The size of this element along the xaxis direction. Typically corresponds to the ‘width’ of the optic.
- ysize
The size of this element along the yaxis direction. Typically corresponds to the ‘height’ of the optic.
- zsize
The size of this element along the zaxis direction. Typically not required, but if needed will correspond to the ‘depth’ of the optic.
- pixel_sizefloat (None)
The pixel size, used for binning rays into images. This is currently a single number signifying square pixels.
- aperturedict or array (None)
Define one or more apertures to to apply to this optic. Each aperture is defined as a dictionary with the following keys: shape, size, origin, logic. The origin and logic field keys are optional. The interpretation of size will depend on the provided shape.
- trace_localbool (False)
If true: transform rays to optic local coordinates before raytracing, do raytracing in local coordinates, then transform back to global coordinates. The default is ‘false’ as most built-in optics can perform raytracing in global coordinates. This option is convenient for optics with complex geometry for which intersection and reflection equations are easier or more clear to program in fixed local coordinates.
- check_sizebool (true)
Perform a check for whether the rays intersect the optic within the defined bounds (usually defined by ‘xsize’ and ‘ysize’). If set to False all rays with a defined reflection/transmission condition will be traced if an intersection can be determined.
- check_aperturebool (true)
Perform a check for whether the rays intersect the optic within the defined bounds (usually defined by ‘xsize’ an ‘ysize’). If set to False all rays with a defined reflection/transmission condition will be traced if an intersection can be determined.
- filters
No documentation yet. Please help improve XICSRT!
- origin
The x,y,x origin of this element in global coordinates.
- zaxis
A unit-vector defining the z-axis of the element in global coordinates. For most optics: z-axis defines the surface normal direction.
- xaxis(optional)
A unit-vector defining the x-axis of the element in global coordinates. For most optics: x-axis defines the ‘width’ direction. If xaxis is not provided it will be automatically generated by: cross(zaxis, [0,1,0]). The yaxis is always automatically generated and defined by: cross(zaxis, xaxis)
- class_name
Automatically generated.
- yo_mama
Is a wonderful person!
New Private Members
- class XicsrtOpticPlanarMosaicCrystal[source]
Inherited Members
- class XicsrtOpticPlanarMosaicCrystal[source]
- __init__(config=None, strict=None, initialize=None)
- aim_to_point(aim_point, xaxis=None)
Set the Z-Axis to aim at a particular point.
- angle_calc(rays, norm, mask=None)
- angle_check(rays, norm, mask=None)
- check_aperture(X_local, mask)
Check if the ray intersection is within the aperture as set by the ‘aperture’ config option.
Note
This method expects to be given the ray intersections in local coordinates. Generally this method should not be called directly instead use check_bounds.
- check_bounds(X, mask)
- check_config()
Check the config before copying to the internal param. This is called during object instantiation (__init__) and therefore before setup is called.
- check_param()
Check the internal parameters prior to initialization. This will be called after setup and before initialize.
- check_size(X_local, mask)
Check if the ray intersection is within the optic bounds as set by the xsize, ysize and zsize config options.
Note
This method expects to be given the ray intersections in local coordinates. Generally this method should not be called directly, instead use check_bounds.
- default_config()
- mosaic_spreadfloat (0.0) [radians]
The fwhm of the Gaussian distribution of crystalite normals around the nominal surface normal.
- mosaic_depthint (15)
The number of crystalite layers to model. This value will depend on the crystal structure and the incident x-ray energy.
- mosaic_cutoff: float (None)
A numerical probability cutoff used to avoid calculation of the mosaic reflection for angles far away from the nominal Bragg angle. A value of 1e-8 would provide a 6-sigma cutoff in angles, while a value of 1e-14 would provide an 8-sigma cutoff. By default no cutoff is used.
- get_config()
- get_default_xaxis(zaxis)
Get the X-axis using a default definition.
In order to fully define the orientation of a component both, a z-axis and an x-axis are expected. For certain types of components the x-axis definition is unimportant and can be defined using a default definition.
- initialize()
Initialize the object.
- interact(rays, xloc, norm, mask=None)
Model reflections from a mosaic crystal using a multi-layer model. This is meant to simulate the penetration of x-rays into the HOPG until the rays either encounter a crystalite that satisfies the Bragg condition or get absorbed. This method of calculation replicates both the HOPG ‘focusing’ qualities as well as the expected throughput.
- intersect(rays)
Calculate the location and normal of the surface at the ray intersections.
Specific shape objects can reimplement this method, or alternatively reimplement the
intersect_location()
andintersect_normal()
methods.Programming Notes
Currently the expectation is that intersect has made copies of ray[‘origin’] and ray[‘mask’] before any calculations. This is done for two reasons: 1. provide more information for the interactions. 2. it is much easier to read and understand the code this way. From a memory efficiency standpoint it would be better to modify these arrays in place instead.
- intersect_distance(rays)
Calculate the distance to an intersection with a plane.
- intersect_location(rays)
Calculate the surface location at the ray intersections.
This base-class just returns a copy of the ray origin.
- intersect_normal(xloc, mask)
The planar optic is flat, so the normal direction is always the zaxis.
- location_from_distance(rays, dist, mask=None)
Calculate 3D locations given a distance along the rays.
- make_image(rays)
Collect the rays that intersect with this optic into a pixel array that can be used to generate an intersection image.
Programming Notes
It is important that this calculation is compatible with intersect_check in terms of floating point errors. The simple way to achieve this is to ensure that both use the same calculation method.
- mosaic_normals(normals, mask, copy=True)
Add mosaic spread to the normals. Generates a list of crystallite normal vectors in a Gaussian distribution around the nominal surface normals.
- point_to_external(point_local)
- point_to_local(point_external)
- ray_to_external(ray_local, copy=False)
- ray_to_local(ray_external, copy=False)
- reflect_vectors(rays, xloc, normals, mask=None)
- rocking_curve_filter(incident_angle, bragg_angle)
- set_orientation(zaxis, xaxis=None)
- setup()
Perform any setup actions that are needed prior to initialization.
- to_ndarray(vector_in)
- to_vector_array(vector_in)
Convert a vector to a numpy vector array (if needed).
- trace(rays)
The main method that performs raytracing for this optic.
Raytracing here may be done in global or local coordinates depending on the how the optic is designed and the value of the configuration option: ‘trace_local’.
- trace_global(rays)
This is method that is called by the dispacher to perform ray-tracing for this optic. Rays into and out of this method are always in global coordinates.
It may be convenient for some optics object to do raytracing in local coordinates rather than in global coordinates. This method facilitates this by implementing the ‘trace_local’ configuration option.
- update_config(config_new, **kwargs)
Overwrite any config values in this object with the ones given. This will be done recursively for all nested dictionaries.
- vector_to_external(vector)
- vector_to_local(vector)